China Sales Eaton Original Hydraulic Motor Bm Hydraulic Cycloid Planetary Gear Motor Manufacturers with Hot selling

Solution Description

Solution Overview
Introduction of hydraulic motor

The hydraulic motor is an govt part of the hydraulic program, which converts the liquid force energy presented by thehydraulic pump into the mechanical vitality (torque and pace) of its output shaft. Liquid is the medium of transmitting pressure andmotion.

Radial piston hydraulic motor
    The functioning theory of the radial piston type hydraulic motor is that when the stress oil enters the base of the piston in the cylinder physique by way of the window of the mounted oil distribution shaft 4, the piston extends outwards and firmly presses from the inner wall of the stator, due to the fact there is an eccentric length among the stator and the cylinder block.
    At the get in touch with point in between the plunger and the stator, the reaction drive amongst the stator and the plunger is. The drive can be decomposed into 2 parts.
    When the oil force performing on the bottom of the plunger is p, the diameter of the plunger is D, and the angle among the drive and is x, the force generates a torque on the cylinder block and helps make the cylinder block rotate. The cylinder block then outputs the torque and pace through the transmission shaft connected with the end face.

 

 

complex parameter

technological parameter

 

Displacement(ml/r)

 

245

 

310

 

390

 

490

 

625

 

800

 

Movement(LPM)

 

Steady

 

eighty

 

80

 

80

 

eighty

 

80

 

80

 

Intermittent

 

a hundred

 

100

 

100

 

100

 

100

 

one hundred

 

Speed(RPM)

 

Constant

 

320

 

250

 

200

 

200

 

160

 

one hundred twenty

 

Intermittent

 

350

 

280

 

230

 

two hundred

 

one hundred sixty

 

a hundred and twenty

 

Pressure(Mps)

 

Ongoing

 

14

 

14

 

14

 

fourteen

 

twelve.five

 

ten

 

Intermittent

 

fifteen

 

fifteen

 

fifteen

 

fifteen

 

thirteen

 

12

 

Torque(N*m)

 

Constant

 

400

 

500

 

550

 

680

 

780

 

800

 

Intermittent

 

420

 

520

 

580

 

seven hundred

 

800

 

820

 

 

 

Relevant models

 

Business profile

 

 

one.One particular set/Plastic box/Cardboard CTN
2.Basic safety for long-length transportation
3.All of the productions will be checked cautiously ahead of shipping and delivery
Pre-revenue Service
1. Inquiry and consulting assist
two. Sample tests assist
3. Advise the most suited machine according to customer’s goal
four. Manufacturing facility going to welcomed
Following-sales Provider
1. Coaching how to put in the machine
two. Instruction how to use the equipment
3. Warranty 1 yr
four. Engineers obtainable to services equipment oversea

FAQ
Q1.Are you a factory or a trading organization?What can you supply?
We are a manufacturing facility locates in industrial belt of HangZhou City,our principal items are hydraulic orbit motors,hydraulic winches,hydraulic
steel gap punchers,mini excavators,etc.

Q2.I want to get your product,how can I spend?
We assistance T/T,Paypal,Western Union,also you can pay out by credit history card.

Q3.How about the warranty?
We promise to source substantial high quality products and skilled after-revenue service.We can offer specialized assist as extended as youneed,over and above that,we also provide 6 months of guarantee.

This fall.If we will not locate what we want on your website,what ought to we do?
You can start a discussion to us,or send out us electronic mail about the descriptions and photographs of the items you need,we will verify ifwe can offer and reply your inquiry ASAP. 

Q5.Could we acquire 1pcs of the item for quality screening?
Of course of training course,we comprehend high quality examination is essential and we are glad to deliver 1 established for quality testing.

 

Certification: ISO9001
Excitation Mode: Excited
Power Rating: 1500W
Casing Protection: Protection Type
Number of Poles: 6
Speed: Low Speed

###

Samples:
US$ 140/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

technical parameter
 
Displacement(ml/r)
 
245
 
310
 
390
 
490
 
625
 
800
 
Flow(LPM)
 
Continuous
 
80
 
80
 
80
 
80
 
80
 
80
 
Intermittent
 
100
 
100
 
100
 
100
 
100
 
100
 
Speed(RPM)
 
Continuous
 
320
 
250
 
200
 
200
 
160
 
120
 
Intermittent
 
350
 
280
 
230
 
200
 
160
 
120
 
Pressure(Mps)
 
Continuous
 
14
 
14
 
14
 
14
 
12.5
 
10
 
Intermittent
 
15
 
15
 
15
 
15
 
13
 
12
 
Torque(N*m)
 
Continuous
 
400
 
500
 
550
 
680
 
780
 
800
 
Intermittent
 
420
 
520
 
580
 
700
 
800
 
820
 

###

Certification: ISO9001
Excitation Mode: Excited
Power Rating: 1500W
Casing Protection: Protection Type
Number of Poles: 6
Speed: Low Speed

###

Samples:
US$ 140/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

technical parameter
 
Displacement(ml/r)
 
245
 
310
 
390
 
490
 
625
 
800
 
Flow(LPM)
 
Continuous
 
80
 
80
 
80
 
80
 
80
 
80
 
Intermittent
 
100
 
100
 
100
 
100
 
100
 
100
 
Speed(RPM)
 
Continuous
 
320
 
250
 
200
 
200
 
160
 
120
 
Intermittent
 
350
 
280
 
230
 
200
 
160
 
120
 
Pressure(Mps)
 
Continuous
 
14
 
14
 
14
 
14
 
12.5
 
10
 
Intermittent
 
15
 
15
 
15
 
15
 
13
 
12
 
Torque(N*m)
 
Continuous
 
400
 
500
 
550
 
680
 
780
 
800
 
Intermittent
 
420
 
520
 
580
 
700
 
800
 
820
 

###

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China Sales Eaton Original Hydraulic Motor Bm Hydraulic Cycloid Planetary Gear Motor Manufacturers     with Hot selling	China Sales Eaton Original Hydraulic Motor Bm Hydraulic Cycloid Planetary Gear Motor Manufacturers     with Hot selling
editor by czh 2023-01-07