China High life 1.8 Step Angle Planetary deceleration stepping motor for Electronic processing and inspection with high quality

Solution Description

 

Item Description

  

Planetary stepper motor has the qualities of substantial precision, higher rigidity, large load, higher effectiveness, high velocity ratio, higher daily life, lower inertia, low vibration, minimal sound, reduced temperature increase, stunning look, light construction, easy installation, precise positioning and so on.
 

 

Item Parameters

 Technical knowledge of gearbox

Equipment Ratio L1
Length(mm)
Efficiency Rated Torque Permissible Torque(Max) Noise (dB)  Backlash min.
at No-load
 Weight(g)
1 Phase five 58 95% 25N.m 45N.m @1m
≤60dB
≤15arcmin 600-800
10
2 Phase fifteen 75 90% 40N.m 60N.m ≤25arcmin 800-960
twenty
twenty five
30
40
fifty

Stepper motor Electrical Technical specs  
 

Sequence
Product
 
Rated
Recent
(A)
Phase
Resistance
(Ω)
Section
Inductance
(mH)
Direct
Wire
(No.)
Keeping
Torque
(N.m)
L
Motor
Length L
(mm)
Rotor
Inertia
(g.cm²)
Motor
Weight
(Kg)
Phase
Angle
(°)
24HS6442 4.two .forty five 1.three 4 one.five 56 350 .seven 1.8
24HS8442 .6 two. 2.two seventy six 550 one.fifteen
24HS1404 .75 3.three two.eight ninety 780 one.four
24HS2404 .9 3.5 3.2 one hundred 850 one.fifty five

Observe:We can manufacture items in accordance to customer’s specifications.
 

Item show

Proportions(Unit: mm)
 

 

Our Rewards

 

Software

 

Firm Profile

HangZhou CZPT Motor Co., Ltd, set up in 2004, is a high-tech company, which is engaged in the development, production and promoting varieties of micro motor and movement management systems.
Making use of high-quality resources, innovative producing process and rigorous high quality administration our product line consists of virtually all kinds of substantial-top quality motors, this sort of as hybrid stepper motors, near-loop stepper motors, brushless DC motors, servo motors, and so on. Our company is 1 of the top producers in domestic and international industry, and our merchandise are at the same stage of intercontinental well-known-brand name ones. Our merchandise are widely used in pc peripheral devices, communications, phase lighting, textiles, packaging, printing, health care gear, stitching devices, and other industrial automation methods.
Our firm is prosperous in specialized knowledge, we use advanced creation procedure and tests equipment, and obeys superior high quality management needs in creation, this sort of as ISO9001: 2008, 6 Sigma. In addition to, our firm also has obtained the CE certificate, and all of our items are RoHS compliant.
With the spirit of “merchandise innovation, higher quality, exceptional service”, our company will constantly emphasis on micro motor sector, and offer more high-good quality items and more expert services for our clients. We try out our greatest to earn the client’ S have faith in by our higher-quality merchandise, superb provider and realistic rates. We are becoming the leader of the micro motor industry.

 

Certifications

 

 

FAQ

Payments

1) We can take EXW, FOB
2) Payment have to be made just before shipment.
3) Import duties, taxes and charges are not provided in the product price tag or delivery charges. These fees are the buyer’s obligation.

Shipping
one) We only ship to your verified deal with. Please make confident your delivery tackle is correct prior to purchase.
two) Most orders will be shipped out in 3-7 operating days on payment affirmation.
three) Delivery normally takes 7-25 functioning days. Most of the things will shipping in 2 weeks, whilst there will be a delay for some thing we can not control (this sort of as the undesirable climate). If it occurs, just get in touch with us, we will assist you examine and resolve any issue.
3) Please  check the package deal on receipt, if there are some damages, you should contact us instantly.
Comments & Refund
  1) Feedback is crucial to us, if you have any dilemma with our items, you should contact us, our technician will give you useful advises.
  2) When you have the parcel and not satisfied with the items or it is other issue, you should inform us quickly, and supply us a photo displaying the detail.
  3) Any explanation necessitating for all refund. Products need to be in original situation and no physical damage. Customer responsible for all transport expense.

 If you require a lot more information, remember to contact with us. We will attach great value to your any difficulties.
Hope we could build a long-time period effective cooperation. 

 

Application: Welding
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gear Ratio L1
Length(mm)
Efficiency Rated Torque Permissible Torque(Max) Noise (dB)  Backlash min.
at No-load
 Weight(g)
1 Stage 5 58 95% 25N.m 45N.m @1m
≤60dB
≤15arcmin 600-800
10
2 Stage 15 75 90% 40N.m 60N.m ≤25arcmin 800-960
20
25
30
40
50

###

Series
Model

 
Rated
Current
(A)
Phase
Resistance
(Ω)
Phase
Inductance
(mH)
Lead
Wire
(No.)
Holding
Torque
(N.m)
L
Motor
Length L
(mm)
Rotor
Inertia
(g.cm²)
Motor
Weight
(Kg)
Step
Angle
(°)
24HS6442 4.2 0.45 1.3 4 1.5 56 350 0.7 1.8
24HS8442 0.6 2.0 2.2 76 550 1.15
24HS1404 0.75 3.3 2.8 90 780 1.4
24HS2404 0.9 3.5 3.2 100 850 1.55
Application: Welding
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 4

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gear Ratio L1
Length(mm)
Efficiency Rated Torque Permissible Torque(Max) Noise (dB)  Backlash min.
at No-load
 Weight(g)
1 Stage 5 58 95% 25N.m 45N.m @1m
≤60dB
≤15arcmin 600-800
10
2 Stage 15 75 90% 40N.m 60N.m ≤25arcmin 800-960
20
25
30
40
50

###

Series
Model

 
Rated
Current
(A)
Phase
Resistance
(Ω)
Phase
Inductance
(mH)
Lead
Wire
(No.)
Holding
Torque
(N.m)
L
Motor
Length L
(mm)
Rotor
Inertia
(g.cm²)
Motor
Weight
(Kg)
Step
Angle
(°)
24HS6442 4.2 0.45 1.3 4 1.5 56 350 0.7 1.8
24HS8442 0.6 2.0 2.2 76 550 1.15
24HS1404 0.75 3.3 2.8 90 780 1.4
24HS2404 0.9 3.5 3.2 100 850 1.55

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China High life 1.8 Step Angle Planetary deceleration stepping motor for Electronic processing and inspection     with high qualityChina High life 1.8 Step Angle Planetary deceleration stepping motor for Electronic processing and inspection     with high quality
editor by czh 2023-01-22